CHMNQ - 80 6853 HLOM CC POLY GLOSS
- MSDS: CHMNQ
- Manufacturer: VALSPAR CORP
- Product Name: 80 6853 HLOM CC POLY GLOSS
- National Stock Number: 8010-00F038999
Product Identification
Product ID:80 6853 HLOM CC POLY GLOSS
MSDS Date:02/06/1996
FSC:8010
NIIN:00F038999
MSDS Number: CHMNQ
Responsible Party
MINNEAPOLIS, MN 55415-1211
US
Emergency Phone: 612-332-7371/800-228-5635
Info Phone: 612-332-7371/800-228-5635
Cage: 13374
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
DIETHYLENE GLYCOL N-HEXYL ETHER
CAS: 112-59-4
RTECS: KL2625000
Fraction By Weight: 5%
POLYURETHANE RESIN
Fraction By Weight: 50-58%
258 G/L; 2.16 LBS/GAL;
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INGESTION/SKIN
ABSORPTION. MAY CAUSE EYE IRRITATION & DAMAGE. CORNEAL INJURY.
SKIN: IRRITATION. INHALATION: RESPIRATORY TRACT IRRITANT. DELAYED
EFFECTS MAY CAUSE KIDNEY DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, PAIN, HEADACHE, NAUSEA, VOMITING
Medical Cond Aggravated by Exposure:ANY RESPIRATORY/SKIN CONDITION.
First Aid
First Aid:EYES: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE CPR/OXYGEN IF NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:201F
Lower Limits:2
Upper Limits:17
Extinguishing Media:CO2, DRY CHEMICAL, FOAM/WATER FOG
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS/AIR
MASKS. CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT COOL W/WATER
SPRAY.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING VAPORS. USE
SELF CONTAINED BREATHING APPARATUS/AIRMASK FOR LARGE LEAKS IN A
CONFINED AREA. AVOID ALL PERSONAL CONTACT.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DON'T STORE >120F. KEEP AWAY FROM IGNITION SOURCES.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN PRODUCT
RESIDUE/FLAMMABLE, EXPLOSIVE VAPORS. DON'T CUT/PUNCTURE/WELD
ON/NEAR CONTAINER. ALL LABEL WARNINGS MUST BE OBSERVED UNTIL THE
CONTAINER HAS BEEN CLEANED/RECONDITIO NED.
Exposure Controls
Respiratory Protection:UNLESS AIR MONITORING DEMONSTRATES VAPOR/MIST
LEVELS >APPLICABLE LIMITS, NO RESPIRATOR IS REQUIRED. IF SO, USE A
PROPERLY FITTED RESPIRATOR (NIOSH/MSHA APPROVED) DURING
APPLICATION.
Ventilation:EXPLOSION PROOF REQUIRED FOR SPRAYING/IN A CONFINED AREA.
Protective Gloves:USUAL FOR PAINT APPLICATION
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:SAFETY GLASSES W/SIDE SHIELDS, USUAL
CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:24
Vapor Density:6.6
Spec Gravity:1.03
Evaporation Rate & Reference:(BUTYL ACETATE=1): 0.4
Solubility in Water:COMPLETE
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT
Percent Volatiles by Volume:72.27
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES & OTHER IGNITION
SOURCES
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.